EK3211 Kitchen Scale Disassembly
Steven Bell and 2 other contributors
Last updated on Jul 31, 2024
Views: 1.5K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 31
- Past 30 Days:
- 144
- All Time:
- 1,484
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
Tools
-
-
-
Peel back the "ELECTRONIC KITCHEN SCALE" label to reveal two screws underneath.
Ask FixBot
-
-
-
Remove the top veneer panel. It should come off without any force.
-
There are two small plastic clips on the edge below the screen, which must be inserted correctly during reassembly.
-
-
-
Remove the screw holding the PCB and screen in place using a #1 Phillips screwdriver.
-
-
-
Remove the PCB and screen assembly.
-
The buttons should also lift up with the rest of the PCB/screen assembly.
-
-
-
-
Use a #1 Phillips screwdriver to remove the four screws holding the load cell mount to the base.
-
-
-
Remove the two screws holding the load cell to the bracket using a #2 Phillips screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
