Introduction
This guide will show you how to replace the nozzle and handle on a Dyson DC28 Animal.
-
-
Place the vacuum either upright or on its back and lift the nozzle lid to access the nozzle.
-
-
-
-
With the vacuum placed upright, press firmly on the gray button, located on the back of the handle, and pull directly upwards until handle is completely removed from the rest of the vacuum
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 21-4, Maness Winter 2017 Member of Cal Poly, Team 21-4, Maness Winter 2017
CPSU-MANESS-W17S21G4
5 Members
10 Guides authored
