DualSense Controller V5 L1 and R1 Button Replacement
Spencer Day and one other contributor
Last updated on May 20, 2025
Views: 1.9K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 46
- Past 30 Days:
- 215
- All Time:
- 1,919
Comments: 8
8 comments on steps.
Completed: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Follow this guide to replace the L1 and R1 trigger buttons on a Sony PlayStation DualSense V5 controller.
Disconnect and power down your controller before starting your repair.
What you need
Tools
-
Spudger4.9
-
-
-
With one hand, grip the controller and use your thumb to hold down the left trigger.
-
With your free hand, insert the flat end of a spudger between the L1 and L2 buttons.
-
Use the spudger to gently pry the L1 button away from the controller and remove it, holding your finger over the button so it doesn't eject.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Cancel: I did not complete this guide.
2 other people completed this guide.
