Drobo FS DRDS2-A Case Removal
Alexander Goodell and one other contributor
Last updated on Apr 13, 2017
Views: 1.7K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 13
- Past 30 Days:
- 79
- All Time:
- 1,680
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide walks through removing the exterior case of the Drobo to get to its inside.
What you need
-
-
-
To start getting the case off remove the front panel so it's out of the way.
Ask FixBot
-
-
-
Next remove the screws from the feet of the case with a phillips head screwdriver.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 10-4, Banghart Winter 2017 Member of Cal Poly, Team 10-4, Banghart Winter 2017
CPSU-BANGHART-W17S10G4
3 Members
60 Guides authored
