Disassembling Sega Genesis mini Console
Eli Brace and one other contributor
Last updated on Jul 10, 2026
Views: 124
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 10
- Past 30 Days:
- 57
- All Time:
- 124
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓Remove the bottom leg pads to find a hole to a screw it is crosshead remove all 4 screws and the shelk top will come off.
-
-
-
Don't put the screwdriver on the circuit board as it can cause it to break
-
Now remove all 4 screws behind the foot pads
-
Remove all screws on the motherboard which is 4 screws
-
Tip: do not try exesive force as it can break something
-
Remove a screw that holds the second board
-
Done
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
