Disassembling RCA CC310 Left Cover - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

This guide will instruct you to take the left cover off of the camcorder.

What you need

Step 1 Disassembling RCA CC310 Left Cover

Disassembling RCA CC310 Left Cover, Disassembling RCA CC310 Left Cover: step 1, image 1 of 2

Disassembling RCA CC310 Left Cover, Disassembling RCA CC310 Left Cover: step 1, image 2 of 2

Remove the six 7.9mm Phillips #0 screws on the back and bottom.
Remove the one 3.8mm Phillips #0 screw on the bottom.
Remove the two 7.5mm Phillips #0 screws on the back and bottom.

Ask FixBot

Step 2

Disassembling RCA CC310 Left Cover: step 2, image 1 of 2

Disassembling RCA CC310 Left Cover: step 2, image 2 of 2

Remove 5.8mm Phillips #1 screw from the side button panel.
Slide the viewfinder all the way to the right and remove the 7.9mm Phillips #0 screw.

Ask FixBot

Step 3

Disassembling RCA CC310 Left Cover: step 3, image 1 of 2

Disassembling RCA CC310 Left Cover: step 3, image 2 of 2

Pry along the seam on the top side near the buttons with a spudger.

Ask FixBot

Step 4

Disassembling RCA CC310 Left Cover: step 4, image 1 of 2

Disassembling RCA CC310 Left Cover: step 4, image 2 of 2

Pull the left panel away from the rest of the camcorder.
Unplug the red speaker cable located at the rear of the device.
Be careful to not pull too hard. The speaker cable is still connected to the panel and it can rip.

Ask FixBot

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 6 other contributors

Ashley Katchadourian

Member since: 01/20/11

133 Reputation

1 Guide authored

Team

Cal Poly, Team 5-20, Amido Winter 2011 Member of Cal Poly, Team 5-20, Amido Winter 2011

CPSU-AMIDO-W11S5G20

4 Members

7 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 3

Past 7 Days: 7

Past 30 Days: 54

All Time: 1,498