Skip to main content

Free Shipping on Domestic Orders $75+

Disassembling PowerA Enhanced 1521747-01 Cover

Views: 1.5K

View statistics:

Past 24 Hours:
2
Past 7 Days:
22
Past 30 Days:
103
All Time:
1,534
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 1

1 person has marked this guide "completed." Will you be next?

Favorites: 1

1 person has favorited (and subscribed to) this guide. Will you be next?

Time Required: 1 minute
Difficulty: Easy
Community-Contributed Guide

An awesome member of our community made this guide. It was not created by iFixit staff.

Disassembling PowerA Enhanced 1521747-01 Cover

Introduction

Go to step 1 ↓

This guide is good if you want to clean your controller's internals.

    1. Disassembling PowerA Enhanced 1521747-01 Cover, Remove the back: step 1, image 1 of 2 Disassembling PowerA Enhanced 1521747-01 Cover, Remove the back: step 1, image 2 of 2
      • Unscrew all of the screws and lift off the back

      • You will need a long screwdriver to reach each screw

      Ask FixBot

      Add Comment

    2. Disassembling PowerA Enhanced 1521747-01 Cover, Remove the front: step 2, image 1 of 2 Disassembling PowerA Enhanced 1521747-01 Cover, Remove the front: step 2, image 2 of 2
      • Unscrew the circled screws to take off the front

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

One other person completed this guide.

Kyeler W

Member since: 03/04/25

3,213 Reputation

15 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 22

Past 30 Days: 103

All Time: 1,534