Disassembling Planet Eclipse Geo3 Macroline
Rett Triplett and 5 other contributors
Last updated on Jan 28, 2014
Views: 1.4K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 20
- Past 30 Days:
- 90
- All Time:
- 1,441
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This is a guide to removing the macroline that connects the POPS and the regulator. This is necessary if the macroline is leaking or to disassemble the body.
-
-
-
Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Clemson, Team 13-6, Benson Fall 2013 Member of Clemson, Team 13-6, Benson Fall 2013
CLEM-BENSON-F13S13G6
3 Members
96 Guides authored
