Disassembling Planet Eclipse Geo3 Grip
Rett Triplett and 6 other contributors
Last updated on Jul 31, 2026
Views: 842
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 19
- Past 30 Days:
- 98
- All Time:
- 842
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓In this guide, the grip will be removed so the battery, wires, or board can be accessed.
What you need
Tools
-
-
-
Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.
Ask FixBot
-
-
-
-
Pull the grip through the opening.
-
The grip is connected in the middle and is one piece.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Clemson, Team 13-6, Benson Fall 2013 Member of Clemson, Team 13-6, Benson Fall 2013
CLEM-BENSON-F13S13G6
3 Members
96 Guides authored
