Disassembling LG VX8550 Front Case
Nathan Jones and 5 other contributors
Last updated on Feb 15, 2018
Views: 2.6K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 20
- Past 30 Days:
- 90
- All Time:
- 2,579
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Missing Steps
Oops! This guide is currently missing one or more important steps.
Introduction
Go to step 1 ↓Steps to remove the LG VX8550 front case
What you need
Tools
-
-
-
-
Continue sliding the iPod opening tool around the seam of the casing to separate the front and back casings.
-
-
-
-
Remove the 2 screws from the back of the phone with a Phillips #00 Screwdriver.
-
-
-
Carefully lift up on the motherboard to see the ribbon cables underneath.
-
Use the spudger to carefully disconnect the ribbon cable from the motherboard.
-
-
-
-
-
Lay the phone with the screen facedown.
-
The 6 slider screws are visible.
-
-
-
Peel back but don't remove the blue tape to access the 2 center screws.
-
Remove the 6 slider screws with the Phillips #00 screwdriver.
-
-
-
-
-
-
Remove the 2 screw covers next to the speaker with a push pin next to the camera.
-
-
-
Use the ipod opening tool to pry the screen casing and the slider mechanism apart from each other.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 34-55, Forte Spring 2010 Member of Cal Poly, Team 34-55, Forte Spring 2010
CPSU-FORTE-S10S34G55
5 Members
120 Guides authored
