Disassembling Compaq Mini 110 Fan
Last updated on Jan 28, 2014
Views: 7K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 21
- Past 30 Days:
- 104
- All Time:
- 7,030
Comments: 4
4 comments on steps.
Completed: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 5 6
5 people have favorited (and subscribed to) this guide. Will you be next?
6 people have favorited (and subscribed to) this guide — including you!
Missing Steps
Oops! This guide is currently missing one or more important steps.
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Introduction
Go to step 1 ↓Abolish the noisy bugger and put in a powerfully quiet cooling device.
What you need
Tools
-
Spudger4.9
-
-
-
Locate the battery and the battery tabs on the bottom of the Compaq Mini.
Ask FixBot
-
-
-
-
-
Use a Philips #0 screwdriver to unscrew the two screws covering the memory compartment on the bottom of the laptop and remove the cover.
-
-
-
-
-
Unscrew all the corner screws. There are four total, one under each rubber pad.
-
-
-
Remove the three screws in the silver tabs at the back of the keyboard.
-
Lift the keyboard away from the laptop.
-
-
-
-
Pry up the top plastic cover using a spudger.
-
These two tabs under the screen need to be pushed in with a spudger.
-
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team 22-2, Maness Fall 2010 Member of Cal Poly, Team 22-2, Maness Fall 2010
CPSU-MANESS-F10S22G2
6 Members
180 Guides authored
