Dexcom G6 Receiver Speaker Replacement
Andrew S and one other contributor
Last updated on Jul 30, 2024
Views: 487
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 11
- Past 30 Days:
- 57
- All Time:
- 487
Comments: 5
5 comments on steps.
Completed: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Needs More Images
A few more images would make this guide's procedures crystal clear.
What you need
Tools
-
-
-
Unscrew the 6 Torx T5 screws from the back of the device
Ask FixBot
-
-
-
Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.
-
Screen Information: Model AM0310R-04 Lot # NHT18080052
-
-
-
-
-
Using a spudger, unplug the Charging Port connector from the motherboard.
-
-
-
-
-
-
Using a spudger, carefully remove the battery connector on the left side of the motherboard.
-
-
-
-
Put down new adhesive tape(be careful not to let it get in the way of the speaker).
-
To reassemble your device, follow these instructions in reverse order.
