Introduction
The fan plays a crucial role in cooling the CPU (Central Processing Unit) and preventing it from overheating. It is secured in place by two screws and a connected cable that must be disconnected before removal.
Disconnect all external power sources prior to beginning this guide. Make sure to power off your laptop completely before proceeding with any steps involving the inner components of the laptop.
There are no special skills or tools required to complete this guide.
What you need
-
-
-
Use a T5 Torx screwdriver to remove the eight 3.2 mm-long screws securing the lower case.
Ask FixBot
-
-
-
Insert an opening pick into the seam between the lower case and chassis.
-
Slide the pick around the entire perimeter while prying to disengage the retaining clips.
-
-
-
-
-
-
Gently walk the battery connector directly out of its socket.
-
-
-
-
-
Flip up the black locking flap securing the fan cable.
-
Disconnect the fan cable.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
Team
University of Memphis, Team 1-2, Sneed Spring 2026 Member of University of Memphis, Team 1-2, Sneed Spring 2026
UM-SNEED-S26S1G2
3 Members
72 Guides authored
