Introduction
In this guide, we will show you how to remove and replace the LED Cover.
What you need
-
-
Remove the screws that secure the base cover to the computer.
Ask FixBot
-
-
-
Slide the base cover towards the front of the computer. Lift it up and away from the computer.
-
If this is all you are doing Follow Step In Reverse if not Go to Next Step.
-
-
-
Lift the black cable-release clip to release the battery cable from the connector on the system board and disconnect the battery cable.
-
-
-
-
Remove the screws that secure the battery to the computer.
-
-
-
Starting on the right side of the system, use a plastic scribe to pry up the LED cover from the computer.
-
-
-
Pull the LED cover toward the keyboard and remove it from the computer.
-
Cancel: I did not complete this guide.
One other person completed this guide.
Team
