What you need
-
-
-
-
Pry up to release the top four snaps securing the keyboard to the computer.
-
-
-
-
-
-
Flip the computer around and disconnect the power board cable (1) and the touchpad cable (2).
-
-
-
Pry up the palm rest using a plastic scribe to release all the snaps on the bottom, left, and right sides of the palm rest. Once all the snaps have been released, lift up the palm rest from the computer and remove.
-
Ask FixBot
Conclusion
To reassemble your device, follow these instructions in reverse order.
