Dell Studio XPS 1647 Hard Drive Replacement
Johnathan Hammond and one other contributor
Last updated on May 15, 2018
Views: 601
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 15
- Past 30 Days:
- 68
- All Time:
- 601
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
Tools
-
-
-
Slide the battery release latch to the side. {2}
-
Slide the battery out of the battery bay. {1}
Ask FixBot
-
-
-
-
-
Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
-
-
-
-
-
-
Remove the three screws securing the hard drive assembly to the computer base.
-
Pull the blue pull-tab to disconnect the hard drive assembly from the system board connector.
-
Lift the hard drive assembly out of the computer base.
-
-
-
Remove the four screws that secure the hard drive bracket to the hard drive and remove the bracket.
-
-
To reassemble your device, follow these instructions in reverse order.
