What you need
-
-
-
Slide the battery release latch until it clicks into place.
-
Slide the battery out of the battery bay.
Ask FixBot
-
-
-
-
-
Loosen the three captive screws on the base cover and lift the base cover off the computer at an angle as shown in the figure.
-
-
-
-
-
-
Remove the four screws that secure the hard drive assembly to the computer base.
-
Slide the hard drive assembly to the side to disconnect it from the hard drive connector and lift it out of the computer base.
-
-
-
Remove the four screws that secure the hard drive bracket to the hard drive.
-
Lift the hard drive off the hard drive bracket.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
