Introduction
This guide is designed to help replace a broken fan from the tower. When working with anything electrical make sure to disconnect it from the power source.
What you need
-
-
Lay the computer on its side; you will see a blue knob.
-
Turn this knob 90 deg clockwise.
-
-
-
Slide the panel case forward about 1/2 inch while knob is turned.
-
Lift panel case off computer.
-
-
-
-
Remove the large blue cover from the computer. There are no screws or tabs holding it in place.
-
-
-
Remove the power supply by pressing the release tab. It is distinguished by the black, red, green, and yellow wires.
-
-
-
Remove the rubber grommets from the base of the fan. The iFixit Opening tool may be useful in this step.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
Cal Poly, Team 22-4, Maness Fall 2010 Member of Cal Poly, Team 22-4, Maness Fall 2010
CPSU-MANESS-F10S22G4
4 Members
26 Guides authored
