Free Shipping on Domestic Orders $75+

Introduction

If your device is still not working you may need to replace the motherboard. This replacement guide walks you through each step of how to safely remove and replace your Dell Latitude ST motherboard.

What you need

Step 1 Battery

Dell Latitude ST Motherboard Replacement, Battery: step 1, image 1 of 3

Dell Latitude ST Motherboard Replacement, Battery: step 1, image 2 of 3

Dell Latitude ST Motherboard Replacement, Battery: step 1, image 3 of 3

Locate the back panel tab.
Press down on the tab to remove the panel.

Edit

Ask FixBot

Step 2

Dell Latitude ST Motherboard Replacement: step 2, image 3 of 3

Using a Phillips #0 screwdriver, remove the four 6mm screws attaching the inside panel to the device.

Edit

Ask FixBot

Step 3

Dell Latitude ST Motherboard Replacement: step 3, image 3 of 3

Use the blue plastic opening tool to push in the tab located on the backside of the device.
Slide the tool around the edges of the device to unsnap the tabs and pry the frame off.

Edit

Ask FixBot

Step 4

Dell Latitude ST Motherboard Replacement: step 4, image 3 of 3

Remove the three 6mm Phillips #0 screws attaching the battery.

Edit

Ask FixBot

Step 5

Dell Latitude ST Motherboard Replacement: step 5, image 3 of 3

Using your hands or a plastic opening tool, unplug the white battery cable.
Push forward on the top part of the cable to disconnect it from the device.

Edit

Ask FixBot

Step 6

Dell Latitude ST Motherboard Replacement: step 6, image 3 of 3

Pull up on the black tab located at the top of the battery to remove the battery from the device.

Edit

Ask FixBot

Step 7 Motherboard

Dell Latitude ST Motherboard Replacement, Motherboard: step 7, image 1 of 2

Dell Latitude ST Motherboard Replacement, Motherboard: step 7, image 2 of 2

Remove the 3mm Phillips #0 screw from the SSD drive which is located above the speaker and to the left of the motherboard.

Edit

Ask FixBot

Step 8

Dell Latitude ST Motherboard Replacement: step 8, image 3 of 3

Pull up on the white and black cables attached to the WLAN to unplug them.
Remove the one 3mm the Phillips #0 screw attached to the WLAN card.
Remove the WLAN card.

Edit

Ask FixBot

Step 9

Dell Latitude ST Motherboard Replacement: step 9, image 3 of 3

Pull up on the copper tape to loosen it from the screen.
Unscrew the seven 6mm the Phillips #0 screws from the base.

Edit

Ask FixBot

Step 10

Locate the grey LCD cable attached to the motherboad on the device.
Pull up the black tape handle attached to the LCD cable to disconnect it.

Edit

Ask FixBot

Step 11

Dell Latitude ST Motherboard Replacement: step 11, image 3 of 3

Using your hands or the blue plastic opening tool, go along the edges of the frame and unsnap the screen from the middle frame.

Edit

Ask FixBot

Step 12

Dell Latitude ST Motherboard Replacement: step 12, image 3 of 3

Turn over the middle frame.
Pull on the white cables with the blue tape to disconnect them.

Edit

Ask FixBot

Step 13

Flip the middle frame back over.
Unplug the three white cables attached to the motherboard.
Use the blue plastic opening tool to push down on the cables to disconnect them.

Edit

Ask FixBot

Step 14

Dell Latitude ST Motherboard Replacement: step 14, image 3 of 3

Unplug the last motherboard cable attached to the bottom of the frame and the motherboard.
With the blue plastic opening tool, flip up the white latch on the top part of the cable.
Pull up on the cable using the blue plastic opening tool to disconnect it from the motherboard.