Dell Latitude E7250 CMOS Replacement
Jordon Dozier and one other contributor
Last updated on Aug 4, 2021
Views: 1.7K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 21
- Past 30 Days:
- 90
- All Time:
- 1,694
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Grammar Police
Embrace your inner English teacher and help improve this guide's grammar!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Needs More Images
A few more images would make this guide's procedures crystal clear.
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
-
-
-
Slide the release latch to unlock the battery
-
Lift the battery from the computer.
Ask FixBot
-
-
-
Remove the screws that secure the base cover to the computer
-
Slide the base cover
-
-
-
Using a plastic scribe, pry the edges of keyboard trim to release it from the computer
-
Lift up to remove the keyboard trim from the computer.
-
-
-
-
Lift the battery bay that secures the keyboard to the computer
-
Lift the latch that secure the keyboard cable to the computer
-
Disconnect the keyboard cable the computer
-
-
-
Remove the screws that secure the SSD card to the computer
-
Lift and remove the SSD card from the computer
-
-
-
Remove the screws that secure the palmrest assembly and flip the computer.
-
Perform the following steps as shown in the illustration: a. Lift the latch that secures the keyboard and touch cable to the computer [1]. b. Disconnect the keyboard and touch cable to the computer [2]. c. Remove the screws that secure the palmrest assembly to the computer [3].
-
Perform the following steps as shown in the illustration: a. Pry the edges of the palmrest assembly [1]. b. Lift the palmrest assembly from the computer [2].
-
-
-
Perform the following steps as shown in the illustration: a. Disconnect the coin-cell cable from the computer [1]. b. Lift the coin-cell battery from the computer [2]
-
Installing the Coin-Cell Battery 1. Place the Coin-cell battery on the computer. 2. Connect the coin-cell battery cable to the computer
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
1 Guide Comment
Not easy, but you can get away without disassembling the entire laptop. You can barely pull the connector out from the socket with tweezers and a little wiggle through the cutout around the CMOS battery.
