This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
-
-
-
Remove the base battery and the base cover from the computer.
-
-
-
Pry out on the memory module's retaining clips until it pops up.
-
-
-
-
Remove the memory module from its connector on the system board by pulling the module away from the system board at a 45-degree angle.
-
Repeat steps 1 and 2 to add the second memory chip (module).
-
-
-
Install the dead battery and the base battery.
-
-
To reassemble your device, follow these instructions in reverse order.