Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Needs More Images
A few more images would make this guide's procedures crystal clear.
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
-
-
-
Remove the three screws at the top of the keyboard.
-
Lift the keyboard only enough to hold it up and slightly forward to allow access to the keyboard connector on the system board.
-
-
-
To release the keyboard cable from the connector on the system board, rotate the plastic bar on the keyboard connector.
-
-
-
To replace the keyboard, connect the keyboard cable to the connector on the system board.
-
Place the tabs along the front edge of the keyboard into the palm rest, and lay the keyboard down on the palm rest.
-
-
-
-
Replace the three screws at the top of the keyboard.
-
Replace the hinge cover.
-
To reassemble your device, follow these instructions in reverse order.