Dell Latitude 3520 Bottom Case Replacement
Shawn Smith and one other contributor
Last updated on Dec 28, 2023
Views: 877
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 26
- Past 30 Days:
- 98
- All Time:
- 877
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Follow this guide to remove the base of your dell latitude.
What you need
Tools
-
-
-
Loosen the nine screws 2mm Phillips #0 that secure the base cover to the assembly.
-
Using a plastic scribe, pry open the base cover starting from the recesses located in the indents near the hinges at the top edge of the base cover.
-
Carefully lift and remove the base cover.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of New Orleans, Team 4-2, McDonald Fall 2023 Member of University of New Orleans, Team 4-2, McDonald Fall 2023
UNO-MCDONALD-F23S4G2
4 Members
84 Guides authored
