Dell Latitude 3310 Bottom Cover Replacement
MattGalliUNT and one other contributor
Last updated on Dec 23, 2025
Views: 267
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 12
- Past 30 Days:
- 73
- All Time:
- 267
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓To access the components in the Dell Latitude 3310, it's necessary to remove the bottom cover of the laptop.
What you need
Tools
-
-
-
Remove seven 8.0 mm screws using a Phillips #1 screwdriver.
-
Remove three 5.0 mm screws using a Phillips #1 screwdriver.
Ask FixBot
-
-
-
Using the iFixit opening tool, gently pry between the body of the laptop and the bottom cover. Make your way around the laptop carefully releasing all plastic clips.
-
The screen hinges are an ideal spot to begin prying.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of North Texas, Team 1-2, Rea Fall 2025 Member of University of North Texas, Team 1-2, Rea Fall 2025
UNT-REA-F25S1G2
3 Members
60 Guides authored
