What you need
-
-
-
Using a Philip's head screwdriver, remove three screws: one directly below the battery and the other two to the right and the left of the two battery lock switches
-
-
-
-
At the top of the keyboard, insert the metal spudger between the keyboard's metal frame and the body of the laptop as shown
-
When inserting the metal spudger, be sure to place the spudger under the frame and not under a key to avoid damaging the component
-
Gently lift up the keyboard starting at the top of the frame
-
Make sure that you do not damage the ribbon attached to the bottom of the keyboard
-
-
-
Pull the clear tab at the end of the ribbon towards the hard drive to detach the ribbon
-
-
-
Perform steps one through four in reverse order with your new keyboard to finish the replacement process
-
Ask FixBot
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
Ohio State, Team 1-1, Buehl Fall 2014 Member of Ohio State, Team 1-1, Buehl Fall 2014
OSU-BUEHL-F14S1G1
4 Members
24 Guides authored
