Introduction
In this guide, we will be showing you how to remove and replace the Battery.
What you need
-
-
-
Disconnect the battery cable from the system board.
Ask FixBot
-
-
-
Peel the tape that secures the hard-drive cable to the battery.
-
-
-
Open the latch and disconnect the hard-drive cable from the system board.
-
-
-
Remove the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.
-
-
-
-
Lift the battery off the palm rest and keyboard assembly.
-
-
-
Press and hold the power button for five seconds to ground the system board.
-
-
-
Align the screw holes on the NEW battery with the screw holes on the palm rest and keyboard assembly.
-
-
-
Replace the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.
-
-
-
Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.
-
-
-
Adhere the tape that secures the hard-drive cable to the battery.
-
-
Cancel: I did not complete this guide.
3 other people completed this guide.
