Introduction
In this guide, we will be showing you how to remove and replace the Hard Drive Assembly.
What you need
-
-
-
Remove the screw that secures the hard-drive assembly to the system board.
Ask FixBot
-
-
-
Slide the hard-drive assembly in the direction shown in the illustration to disconnect it from the connector on the system board.
-
-
-
Lift the hard-drive assembly off the system board.
-
-
-
Remove the four screws that secure the hard-drive bracket to the hard drive.
-
-
-
-
Replace the four screws that secure the hard-drive bracket to the hard drive.
-
-
-
Place the hard-drive assembly on the system board.
-
-
-
Slide the hard-drive assembly to connect it to the connector on the system board.
-
-
-
Replace the screw that secures the hard-drive assembly to the system board.
-
-
Cancel: I did not complete this guide.
One other person completed this guide.
