Dell Inspiron 14 N4020 Display Assembly Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

In this guide, we will show you how to remove and replace the Display Assembly.

What you need

1. Step 1 Disconnecting the Display Cable
  WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
  
  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  
  Disconnect the display cable from the connector on the system board.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2 Remove the Screws
  Remove the two screws (one on each side) that secure the display assembly to the computer base.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3 Removing the Display Assembly
  Lift and remove the display assembly out of the computer base.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4 Placing the Display Assembly
  Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
6. Step 5 Connecting the Display Cable
  Connect the display cable to the connector on the system board.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Finish Line

Cancel: I did not complete this guide.

Author

with 1 other contributor

Terrence15

Member since: 12/18/17

80,125 Reputation

441 Guides authored

+26 more badges

Team

RampUP America, Inc. Member of RampUP America, Inc.

Community

45 Members

12,136 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 25

All Time: 517