Introduction
In this guide, we will show you how to remove and replace the Battery.
What you need
-
-
-
Disconnect the battery cable from the system board.
Ask FixBot
-
-
-
Remove the screws that secure the battery to the palm-rest assembly.
-
-
-
Lift the battery, along with its cable, off the palm-rest assembly.
-
-
-
-
Turn the computer over, open the display, and press the power button for about five seconds to ground the system board.
-
-
-
Align the screw holes on the battery with the screw holes on the palm-rest assembly and place the battery on the palm-rest assembly.
-
-
-
Replace the screws that secure the battery to the palm-rest assembly.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
