Introduction
This guide demonstrates how to remove the back cover to your Dell G15-5510 Gaming laptop.
What you need
-
-
-
Use a Phillips #1 screwdriver to remove the four screws securing the back cover.
-
Two 8 mm screws
-
Two 5.8 mm screws
-
Loosen the four captive screws.
Ask FixBot
-
-
-
Insert an opening pick between the bottom-left corner of the back cover and the chassis.
-
Pry upward to release clips holding the cover in place.
-
-
-
-
Insert your opening pick again between the bottom-right corner of the back cover and the chassis.
-
Pry up to release the remaining clips securing the back cover.
-
-
-
Grip the front of the back cover and lift it away from the laptop.
-
Pull the back cover towards you to disconnect the clips along the top of the back cover.
-
Remove the back cover.
-
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Dell laptop answers community for help.
Cancel: I did not complete this guide.
One other person completed this guide.
