DeWalt DW660 Power Switch Replacement
Joseph Pacitto and 3 other contributors
Last updated on May 19, 2016
Views: 857
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 21
- Past 30 Days:
- 97
- All Time:
- 857
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓The DeWalt DW660 has an amazing dynamic power switch that makes operating the device extremely easy. The bump off feature of the switch allows for an easy shut off with minimal effort.
What you need
Tools
-
-
-
-
Pick up the switch from the device with the wires still attached.
-
Remove the actuator from the switch.
-
Pull the two wires from the switch.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 2-7, Isaacson Spring 2016 Member of UMass Dartmouth, Team 2-7, Isaacson Spring 2016
UMASSD-ISAACSON-S16S2G7
3 Members
60 Guides authored
