DeWalt DW660 Collet Replacement
Last updated on May 19, 2016
Views: 4.7K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 23
- Past 30 Days:
- 102
- All Time:
- 4,733
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓The DW660 uses a tool-free bit change mechanism, which involves two grips: one locks the motor shaft in place, while the other allows the user to rotate the collet nut independently of the motor shaft.
-
-
-
Press lock button #2 while still holding lock button #1.
-
Rotate lock button #2 counterclockwise until you see the collet nut become loose.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
UMass Dartmouth, Team 2-7, Isaacson Spring 2016 Member of UMass Dartmouth, Team 2-7, Isaacson Spring 2016
UMASSD-ISAACSON-S16S2G7
3 Members
60 Guides authored
