Introduction
The DeWalt D26451 is much like other sanders of its brand. The D26451 is 5 inches and single speed at 12,000 RPM. According to DeWalt, newer models have improved dust collection and have less vibration during use, but that is not the case for the discontinued DeWalt D26451.
Dust collection is one of the D26451's poorer properties. The dust bag may become clogged or full, or just need replaced all together.
In this repair guide, we will be teaching you how to empty and replace the dust collection bag on the DeWalt D26451.
What you need
-
-
-
Slightly twist the grip counter-clockwise to release quick connect.
-
Pull the bag from the sander.
Ask FixBot
-
-
-
-
Empty loose debris from the bag into trash.
-
Collapse and expand the bag over the trash can to dislodge debris left inside the bag.
-
-
-
If you're replacing the bag all together, you can order a replacement bag here.
-
Attach the bag by twisting clockwise back onto the sander.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Western Carolina University, Team 1-2, Virtue Spring 2016 Member of Western Carolina University, Team 1-2, Virtue Spring 2016
WCU-VIRTUE-S16S1G2
6 Members
60 Guides authored
