DeLonghi ECAM back panel removal
VauWeh and 2 other contributors
Last updated on Oct 5, 2026
Views: 20K
View statistics:
- Past 24 Hours:
- 31
- Past 7 Days:
- 158
- Past 30 Days:
- 568
- All Time:
- 19,695
Comments: 5
5 comments on steps.
Completed: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓For most repairs, the machine must be opened. The first step is to take the back off.
What you need
Tools
-
-
-
Remove all attachments such as water tank, pulp drawer, brew group.
-
Turn the machine with the back facing you.
-
Remove five Torx T20 security screws.
Ask FixBot
-
-
-
Lift out the back.
-
The following components are immediately visible:
-
grinder
-
pump
-
flowmeter
-
-
-
Work the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
