D-Link DCS-825L LED Light Cover Replacement
Annalise Leclair and 3 other contributors
Last updated on Feb 27, 2020
Views: 704
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 12
- Past 30 Days:
- 65
- All Time:
- 704
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Does the LED light cover have a crack on the outer cap? Is it yellowed or discolored? This guide will show you the way to replace the LED light cover for your Wi-Fi Baby Camera.
What you need
Tools
-
-
-
Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.
Ask FixBot
-
-
-
Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.
-
-
-
-
Tool used on this step:Tweezers$4.99
-
Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.
-
-
-
Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team S1-G5, Leahy Fall 2018 Member of USF Tampa, Team S1-G5, Leahy Fall 2018
USFT-LEAHY-F18S1G5
4 Members
48 Guides authored
