CygoLite Night Rover Top Casing Replacement
Last updated on Jan 28, 2014
Views: 649
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 17
- Past 30 Days:
- 80
- All Time:
- 649
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will show how to install the top casing on the CygoLite night rover. It will start from the torn-down position and show the proper installation of the top casing.
What you need
-
-
-
Start with the device torn down to just the base, with the internals of the device showing.
-
Place the top casing onto base.
-
Ensure that the rubber gasket is positioned properly between the top and bottom casings
-
Flip the device with the bottom facing upwards.
-
Reinsert and screw in the screws to the bottom casing.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Clemson, Team 14-3, Benson Fall 2012 Member of Clemson, Team 14-3, Benson Fall 2012
CLEM-BENSON-F12S14G3
4 Members
60 Guides authored
