Introduction
Are you having issues with your Cuisinart Oven's light not turning on? You may need to replace the light's spring. This guide will show you how to.
What you need
-
-
-
Using a 25-hexagon head screwdriver, unscrew these three 7.31 mm screws.
Ask FixBot
-
-
-
Using a Phillips #1 screwdriver, remove all of these 7.31 mm screws.
-
Pull off the back panel.
-
-
-
Use a spudger to pull out the grey stoppers.
-
Use a Phillips #1 screwdriver to remove all three 11 mm screws.
-
-
-
-
Unscrew all of the 11.05 mm screws that connect the outer shell to the interior device.
-
-
-
Push down with a screw driver between the tabs, then pull up to release the tabs. Pull the top piece off.
-
-
-
-
-
Unscrew these two screws to detach the light switch from the panel.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of New Orleans, Team 4-6, McDonald Fall 2023 Member of University of New Orleans, Team 4-6, McDonald Fall 2023
UNO-MCDONALD-F23S4G6
4 Members
48 Guides authored
