What you need
-
-
Make sure the device is unplugged and not connected to a power source.
Ask FixBot
-
-
-
Using your Phillips head screwdriver, remove the 10 outer black screws from the back of the device.
-
-
-
-
Gently remove the back of the device, being careful not to pull any wires out of place.
-
-
-
Using the Philips head screwdriver, remove the 4 black screws from the audio input box.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
UMass Dartmouth, Team 1-4, Gulbrandsen Fall 2013 Member of UMass Dartmouth, Team 1-4, Gulbrandsen Fall 2013
UMASSD-GULBRANDSEN-F13S1G4
3 Members
6 Guides authored
