Creative Zen V Plus Control Panel Disassembly
Brock Schaffer and 3 other contributors
Last updated on Dec 22, 2016
Views: 842
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 19
- Past 30 Days:
- 97
- All Time:
- 842
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide's procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓Instructions how to remove the control pad cover panel on the Creative Zen V Plus.
What you need
Tools
-
-
-
Locate the groove along side the device where the control panel cover plate are seated.
-
Using the ifixit opening tool, place the skinny flat side of tool inside groove and with a twisting motion, pry the mating surfaces apart.
-
Once to two surface have detached, gently pull the two surfaces apart with your fingers.
Ask FixBot
-
-
-
Place the panel on top in it's original position and firmly press back into place .
Team
IUPUI, Team 2-5, Baechle Fall 2016 Member of IUPUI, Team 2-5, Baechle Fall 2016
IUPUI-BAECHLE-F16S2G5
4 Members
84 Guides authored
