Introduction
Remove the back cover and replace the whole battery.
What you need
-
-
-
Locate the opening line between the cover and the device. Then locate the groove near the charging port.
Ask FixBot
-
-
-
Use a metal spudger to separate the back cover from the front touch screen.
-
To do this, place the metal spudger in between the groove near the charging port of the device to unlatch the first clip.
-
-
-
-
Continue to separate all of the clips around the device until the back cover comes off completely.
-
-
-
-
-
Locate the white plug next to the battery.
-
Use your fingers to pull off white plug that connected to the battery.
-
-
-
The battery should only be connected to the LCD by adhesive tape.
-
Using force, carefully remove the battery while holding the LCD in place.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
University of North Texas, Team S2-G2, Thompson Fall 2017 Member of University of North Texas, Team S2-G2, Thompson Fall 2017
UNT-THOMPSON-F17S2G2
4 Members
60 Guides authored
