Introduction
This guide will detail how to replace the RAM in a CQ60-211DX.
What you need
-
-
-
Power off the CQ60 and unplug all cables connected to it.
Ask FixBot
-
-
-
Using a standard #2 Phillips-head screwdriver, remove the back compartment of the CQ60 to access the motherboard.
-
-
-
-
Use your fingers to push the retention clips away from the RAM sticks, and carefully pull out the old RAM.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Team
University of North Texas, Team S2-G3, Riccardelli Fall 2018 Member of University of North Texas, Team S2-G3, Riccardelli Fall 2018
UNT-RICCARDELLI-F18S2G3
4 Members
48 Guides authored
