ClickN Kids Tablet Camera Replacement
Kevin Finney and 3 other contributors
Last updated on Jun 23, 2015
Views: 1.3K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 14
- Past 30 Days:
- 88
- All Time:
- 1,315
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓How to access the camera within the device for a replacement.
What you need
Tools
-
-
-
Insert a plastic opening tool into the space between the screen and the back side.
Ask FixBot
-
-
-
Press the plastic opening tool in until you hear a “click” and that part of the tablet opens.
-
Press and slide the plastic opening tool around all sides of the tablet until all sides pop off.
-
-
-
Lift the detached screen from the camera side until you can see the inside of the tablet.
-
-
-
There is a black tab behind the long ribbon cable. Lift up the black tab.
-
For the ribbon cable in the back, pull the black tabs on the side out.
-
Detach the ribbon cables connecting the screen to the motherboard.
-
Remove any tape that is holding down the ribbon cables. Set it aside.
-
-
-
-
Pull out the two black ends of the base on the motherboard.
-
Slide out the camera’s ribbon cable once the ends are loosened.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Baylor, Team 4-4, Williams Spring 2015 Member of Baylor, Team 4-4, Williams Spring 2015
BU-WILLIAMS-S15S4G4
3 Members
48 Guides authored
