Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Cleaning the Cutting Blade

Introduction

This guide leads you through the process of opening up the LabelManager and cleaning the cutting blade. Keep in mind that the device has loose parts. Be careful and keep track of all parts.

  1. Cleaning the Cutting Blade, Cleaning the Cutting Blade: step 1, image 1 of 1

    • Start by placing your device on its face.

    Edit

  3. Cleaning the Cutting Blade: step 2, image 1 of 2 Cleaning the Cutting Blade: step 2, image 2 of 2

    • Open the label cartridge compartment and remove any current label cartridge to reveal your label cutting blade.

    Edit

  4. Cleaning the Cutting Blade: step 3, image 1 of 1

    • Press down on the exterior button to protrude the blade outward. Once the blade is exposed simply use a microfiber cloth or cotton swab to clean off the blade. Be sure to use rubber cleaning gloves for added safety.

    • Be careful, the blade is sharp!

    Edit
Finish Line

2 other people completed this guide.

1 Guide Comment

Group 9: Looks good. Great use of the hazard marker for the sharp blade.

Zachary Parker - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 23

All Time: 941