Check for OBD2 codes, ABS, DTC without a scanner
ndsol and one other contributor
Last updated on Nov 16, 2018
Views: 6K
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 16
- Past 30 Days:
- 104
- All Time:
- 5,987
Comments: 2
1 comment on steps, 1 guide comment.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
-
-
-
Turn ignition two clicks to the ON position
-
Insert a bent paperclip into the SCC connector. (See video for where the SCC connector is located)
-
Touch both of the exposed pins to short the connection. Continue to short the connection for more than 5 seconds.
-
Any codes will display on the Odometer/Trip display, or "NO" if there are no stored codes
-
Remove paperclip and wait 10 seconds
-
Turn ignition OFF and remove key
Ask FixBot
-
-
-
Cancel: I did not complete this guide.
2 other people completed this guide.
1 Guide Comment
Please note the codes that might be displayed and methods to interpret them
