Introduction
This guide will teach you how to replace the motherboard within the Capresso Perfectea.
What you need
-
-
Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device.
-
-
-
-
Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab.
-
Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out.
-
Ask FixBot
Conclusion
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 6-17, Maness Spring 2015 Member of Cal Poly, Team 6-17, Maness Spring 2015
CPSU-MANESS-S15S6G17
4 Members
6 Guides authored
