Canon PowerShot A590 IS Memory Card Replacement
Last updated on Jan 28, 2014
Views: 6.4K
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 21
- Past 30 Days:
- 93
- All Time:
- 6,421
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 4 5
4 people have marked this guide "completed." Will you be next?
5 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Missing Steps
Oops! This guide is currently missing one or more important steps.
Introduction
Go to step 1 ↓This guide will instruct the user on how to open the bottom hatch to access the batteries and memory card, and to remove and replace the memory card.
-
-
-
*See battery replacement guide for help opening the hatch.
Ask FixBot
-
-
-
To eject your memory card, simply press it into the camera gently, and it will spring out.
-
After it has been released from the camera, just pull it out.
-
-
-
-
To replace the memory card, make sure it is oriented with the label facing towards the front of the camera, with the contacts going in first, facing the back of the camera.
-
Push the card into the slot gently until you hear a 'click'. It will then be locked into place in the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
Cal Poly, Team 9-19, Regan Fall 2010 Member of Cal Poly, Team 9-19, Regan Fall 2010
CPSU-REGAN-F10S9G19
4 Members
84 Guides authored
