Canon EOS Rebel XSi Back Panel Replacement
Erik Mork and 5 other contributors
Last updated on Apr 28, 2022
Views: 2K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 18
- Past 30 Days:
- 97
- All Time:
- 1,992
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This replacement guide shows how to remove this device's back panel. This step is necessary to replace many internal components of the camera.
What you need
Tools
-
-
-
Squeeze the eyepiece between your index finger and thumb and lift up and off.
Ask FixBot
-
-
-
Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera.
-
-
-
Using the PH000 screwdriver head, remove the two 3mm screws on the right side of the camera (from the LCD screen).
-
-
-
Using the PH000 screwdriver head, remove one 4 mm screw on the left side of the camera (from the LCD screen).
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
Cal Poly, Team 22-10, Maness Winter 2017 Member of Cal Poly, Team 22-10, Maness Winter 2017
CPSU-MANESS-W17S22G10
4 Members
60 Guides authored
