Canon EOS Rebel T4i Flash Bulb Replacement
Jordan Rabold and 7 other contributors
Last updated on Jan 3, 2025
Views: 5.5K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 20
- Past 30 Days:
- 88
- All Time:
- 5,499
Comments: 3
3 guide comments.
Go to guide commentsCompleted: 10 11
10 people have marked this guide "completed." Will you be next?
11 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Missing Steps
Oops! This guide is currently missing one or more important steps.
Introduction
Go to step 1 ↓This guide details how to replace the flash bulb of this camera.
There is a high voltage capacitor which powers the camera flash. This capacitor should be safely discharged before proceeding with this repair (not currently covered in the guide).
What you need
Tools
-
-
-
Locate the battery cover at the bottom of the camera.
-
Pull down on the black tab to open the cover.
Ask FixBot
-
-
-
Push the grey tab on the right side of the battery.
-
Remove the battery from the slot.
-
-
-
-
-
-
Using a JIS #000 screwdriver, unscrew the two 4.9mm JIS screws which are located underneath the flash.
-
-
Tool used on this step:Tweezers$4.99
-
Use the tweezers to remove the excess glue around the wiring. This will allow you to cut the wire and remove the light in the next step.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
10 other people completed this guide.
Team
Cal Poly, Team 12-33, Maness Spring 2014 Member of Cal Poly, Team 12-33, Maness Spring 2014
CPSU-MANESS-S14S12G33
4 Members
60 Guides authored
3 Guide Comments
how do you reverse step 6 - cutting the wires?
No parts required? So I can repair my flash not having to buy a new bulb? haha Please, I need the link from where I repair my burned built-in flash :/
