Canon EOS Rebel G Back Panel Latch Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

This guide teaches how to to install the back panel latch on your camera.

What you need

1. Step 1 Front Panel
  Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Using your finger, peel back the textured grip so the components are separated.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Using the flat end of a spudger, loosen the connection between the front panel and the device.
  
  Remove the front panel using your hands.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
1. Step 4 Back Panel Latch
  Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera.
  
  Two 4.3 mm Phillips screws
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 5
  Open the back panel by pushing the locking latch up.
  
  Lift the latch cover off of the camera body.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 6
  Slide the side latch (for the back door) up and then lift straight away from the camera body.
  
  Sometimes the latch will detach while pushing it up.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 7 other contributors

Zach

Member since: 04/04/12

46 Reputation

8 Guides authored

Team

Cal Poly, Team 14-9, Forte Spring 2012 Member of Cal Poly, Team 14-9, Forte Spring 2012

CPSU-FORTE-S12S14G9

5 Members

144 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 30

All Time: 3,323