Skip to main content

Free Shipping on Domestic Orders $75+

Canon EOS 5D Mark II Clock Battery Replacement

Views: 30K

View statistics:

Past 24 Hours:
6
Past 7 Days:
57
Past 30 Days:
204
All Time:
29,758
Comments: 6

2 comments on steps, 4 guide comments.

Go to guide comments
Completed: 18

18 people have marked this guide "completed." Will you be next?

Favorites: 1

1 person has favorited (and subscribed to) this guide. Will you be next?

Time Required: 5 minutes
Difficulty: Easy
Canon EOS 5D Mark II Clock Battery Replacement

Introduction

Go to step 1 ↓

It is important to note that removing the memory battery will cause the camera to forget all of your settings. It would be helpful to document your settings before performing these steps. Perform these steps as basic troubleshooting, much like a soft reset.

What you need

Tools

    1. Canon EOS 5D Mark II Clock Battery Replacement, Clock Battery: step 1, image 1 of 1
      • Lift the rubber flap covering the input/output jacks.

      Ask FixBot

      Add Comment

    2. Canon EOS 5D Mark II Clock Battery Replacement: step 2, image 1 of 1
      • Using a Phillips #000, remove the single 3.4 mm screw.

      Ask FixBot

      Add Comment

    3. Canon EOS 5D Mark II Clock Battery Replacement: step 3, image 1 of 1
      • This step will permanently erase all user settings.

      • The memory battery can now be easily slid out of place.

      • If you are following this guide in an effort to perform a hard reset, you should now press the shutter button multiple times in order to drain any left over power, then replace the batteries and power the device back on. You have just performed a hard reset!

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

18 other people completed this guide.

Mike Seed

Member since: 09/22/14

3,190 Reputation

8 Guides authored

Team

USF Tampa, Team 1-6, Hickman Fall 2014 Member of USF Tampa, Team 1-6, Hickman Fall 2014

USFT-HICKMAN-F14S1G6

3 Members

96 Guides authored

4 Guide Comments

This Battery for Clock only? or CMos and Personal setting to?

there has to be something to retain all these settings once the main battery pack goes dead and or is removed from the camera?

My User 1 Pictures styles wont Save? it'll save but once i turn off My Canon Eos 5D Mark II and then back on again, my Color /Contrast/Sharpness are all Dead Center/= back to Default AGAIN? :/

Any Help here?

THANK YOU,

Greg - Reply Share

I did not write the original post, but I believe once you remove this battery ALL custom changes and time will be gone. You will have to re-create them. Besides the rechargeable battery, the only one keeping track of some settings is this one.

CL

Carlos Lijeron - Reply Share

Will doing this reset the shutter count in the camera? Like when you go to an external program to see how many shutter actuations there have been over the lifetime of the camera, will that number be erased?

Tom Fewchuk - Reply Share

No, because some faulty behavior i removed my clock battery from my 5D MK2, but the shutter count is still the same, it would be to easy to hack a camera to be sold on a good price. :)

Vass János Szilárd - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 57

Past 30 Days: 204

All Time: 29,758